A Rollsroller was used to apply the backing to the frost vinyl after the logo was cut using a Roland VS640i. This ensures a perfect cut and perfect application.

After being cut with our 64 inch Roland plotter, the front vinyl was layed out on our RollsRoller flatbed applicator to move where the inside of the lettering was removed and the vinyl backing was applied.

Studio City Orthodontist in Los Angeles called WindowTintLA to apply frost film with an Invisalign logo cut from the negative space of the film

Frost window film will obscure the view out and in, while still allowing for light in. Though many would confuse it for etched glass, the film is completely removable yet includes a 15 year commercial warranty as well as a lifetime residential warranty.

The frost window film is applied from the inside. The backing is left in place until the film is completely died and adhered to the glass. The backing is left is place to ensure the logo does not shift in any way during the drying process. It is then we return to remove the backing to reveal the finished product.

This view shows the frost film being applied, before the backing was removed. Frost window film is the perfect low cost alternative to expensive glass etching.

The view from the inside of the custom cut vinyl frost logo applied. Having a logo cut out of frost film is both decorative and a great branding opportunity while also providing privacy.

The view from the outside in of this perfectly done custom logo cut out of frost window film.